June 24 2022
Did you ever look at a particular waist reduction corset and thought to yourself, “how can I lace it up on my own”? Well, if you did then this is the right article for you. In this post, we are going to talk about lacing a corset from scratch and the necessary steps that you need to follow. Corset lacing, pretty much like any other skill, requires a lot of time and patience to learn. If you are trying this for the first time then looking at so many different lacing styles would definitely overwhelm you.
However, you should be afraid and go on with your lacing training in order to get the best results. While other skills can take a lot of time, lacing is something that will require just a couple of tries before you are able to master the art in the best way. You will be running the laces on the corsets yourself and hence there is pretty much only that job you need to master. With time you will be loosening and tightening them as well. The process of lacing is an important part that you have to learn if you have bought a brand new underbust or overbust corset. So, we are going to help you out with that.
How Does Lacing Work? How to Lace a Corset?
If you have purchased an underbust or an overbust corset from Bunny Corset, there is a chance that it will arrive pre-laced. However, in case the corset is from some other place, you might have the lace it up yourself. Hence, there is no doubt that you are going to need some help in the process. To help you out with the lacing, we are going to provide you with an explanation of all the important steps that you need to follow in order to lace your waist training corset. It is important to keep in mind that there are different lacing styles and this is the most common method that is used by people to lace any amazing corset to work properly.
- Step 1
The first step is definitely the most important step since you will be learning how to thread the lace in the best way. First of all, you have to thread the particular lace that you have chosen for the cotton corset. Threading the lace onto the top two eyelets of the corset will ensure that the horizontal lace falls on the interiors of the corset. You also need to ensure that the lace on either end has equal length.
- Step 2
Now you will have to take the corset lace on the right-hand side and then thread it through the eyelet that is next available on the left. You also need to make sure that the particular lace is remaining outside the entire underbust corset area until you are finished threading it through the eyelet. Repeat the step for the left-side lace as well. Now you will see that the laces have created an X-like pattern on the exterior of the corset. You will also notice that these laces have passed on to the interior side.
- Step 3
Now you have to keep on repeating step 2 till you manage to reach the waistline area of the black corset. In this area, you will have to create something that resembles the puller loop. This loop can be used for tightening the corset in an easy manner once the lacing has been completed. Also, you need to ensure that the laces are placed on the exterior side of the corset in order to make sure that the puller loop is created efficiently. This is definitely one of the most important steps that you have to follow in order to get optimal results in the end.
- Step 4
You will then have to take the lace that is on the right-hand side and then thread it into the eyelet that is next available below the same side. Make sure that the lace is kept on the exterior side of the dress corset until you are completely done threading the eyelet. Now you will see that the loop is forming. Repeat the same thing for the left-side lace as well. Now the laces should be passing through each other inside the corset.
- Step 5
In the second last step of lacing your leather corset or any other type of corset, you need to repeat the 2nd step again and again till you reach the corset’s bottom area. Now is the time to stop the threading. After that, you have to adjust the laces and the slacks properly throughout the entire length of your corset. When you do that, it will leave you with 4 inches of the slack that is left between the 2 different sides of the corset. All you have to do next is tie the laces that are situated in the bottom section of the corset. One thing that you need to keep in your mind is that there is no need to tighten the corset any further as you will have the best results like this.
- Step 6
This is the final step of the lacing process for your steampunk corset and you will definitely see the results after completing this step. All you have to do in the final step is pull on the loops that you created while doing the 4th step. Remember the puller loops? When you pull on these loops, you will be able to tighten your corset according to your liking. Once you have properly tightened the corset, you need to tie those loops into a shoelace knot.
Corsets are incredibly useful when it comes to benefits such as weight loss, reduction of the waistline, and so much more. With proper lacing, the corsets are provided with enough durability and flexibility for the users. So, if you are on the lookout for proper corset lacing tips, this is where you will find the right help. Follow these above-mentioned steps and see the best results.